Tender For providing of custom bid for services - custom bid for services - annual maintenance contract for ground support equipment-work / schedule of requirement for maintenance, to be undertaken during period of amc, 1. adaptor maintenance stand pt no. 284557-1-1, 1.1, 1.2, 3.1, weekly inspection, 1.1.1 visually check the serviceability of item., 1.1.2 check cleanliness and husbandry state of the item., monthly inspection, 1.2.1 check visually condition of the item., 1.2.2 check condition of rubber beading., yearly inspection, 1.2.3 check item for operational condition., 1.2.4 painting of the item., 2. towing arm for dornier aircraft pt. no. misc-1512, 2.1 weekly inspection, 2.2, 2.1.1 visually check the serviceability of item., 2.1.2 check cleanliness and husbandry state of the item., 2.1.3 lubricate moving parts., 2.1.4 check the condition of wheel., monthly inspection, 2.2.1 clean and apply grease on moving parts., 2.2.2 check visually condition of the item., 2.2.3 check condition of wheel., 2.2.4 check condition of rubber beading., 2.3 yearly inspection, 2.3.1 check item for operational condition., 2.3.2 painting of the item, 3. nitrogen trolley with gauge pt. no. misc-5011, 3.1 daily inspection, 3.1.1 check for the general condition of the trolley., 3.1.2 check the n2 pressure available in bottle., 3.1.3 check for any static leak., 3.1.4 check all wheel for free rotation., 3.1.5 calibration of gauge when due., 3.2 weekly inspection, t 3.2.1 check the operational serviceability state of item., 3.2.2 check cleanliness and husbandry state of kit., 3.2.3 check for any leakage and erratic reading shown by pressure, gauges., 3.2.4 operate as per user manual and put appropriate label to indicate, the state., 3.2.5 check the condition of wheel., 3.2.6 check for pressure in cylinder and serviceability of gauges., 3.3 monthly inspection, 3.3.1 clean and apply grease on cylinder knob screw., 3.3.2 check visually the condition of hose., 3.3.3 test regulator for proper functioning., 3.4 yearly inspection, 3.4.1 check gauge for calibration, 3.4.2 check condition of wheel., 3.4.3 painting of whole unit., 3.4.4 calibration of hose., 4. jack adopter nlg pt no. u01a070000, 4.1 weekly inspection, 4.1.1 check cleanness and husbandry state of item., 4.1.2 check the serviceability state of item as per the user's manual., 4.2 yearly inspection, 7.1.1 painting of whole unit., 5. jack nose/main pt. no. vtej-3610, 5.1 daily inspection, 5.1.1 check the serviceability state of item as per the user's manual., 5.1.2 check for any signs of leak., 5.2 weekly inspection, 5.2.1 visually check the serviceability of the jack and wheels., 5.2.2 check cleanness and husbandry state of item., 5.2.3 lubricate the moving parts., 5.2.4 check the serviceability state of item as per the user's manual., 5.2.5 check the oil level port and plug., 5.3 monthly inspection, 5.3.1 replenishment of oil., 5.4 yearly inspection, 5.4.1 load testing (load testing is mandatory after, serviceability), 5.4.2 authority: - oem operation and maintenance manual., 6. jack tail pt. no. vaj-1.5/650, 6.1 daily inspection, major un6.1.1 check the serviceability state of item as per the user's manual., 6.1.2 check for any signs of leak., 6.2 weekly inspection, 6.2.1 visually check the serviceability of the jack and wheels., 6.2.2 check cleanness and husbandry state of item., 6.2.3 lubricate the moving parts., 6.2.4 check the serviceability state of item as per the user's manual., 6.2.5 check the oil level port and plug., 6.3 monthly inspection, 6.3.1 replenishment of oil., 6.4 yearly inspection, 6.4.1 load testing (load testing is mandatory after, serviceability), 6.4.2 authority: - oem operation and maintenance manual., 7. working platform engine pt. no. 63205a-000-000aoof, 7.1 weekly inspection, 7.1.1 visually check the serviceability of the item., 7.1.2 check cleanliness and husbandry state of item., 7.1.3 lubricate the moving parts., major un7.1.4 check the condition of the wheel along with the
Tender For railing construction and beautification work at the platform near valmiki awas in ward no. 26 ravishankar nagar. (district mineral foundation trust fund)
Tender For tender for annual rate contract work for hiring of articulated hydraulic elevating platform mounted on vehicle mahindra bolero camper or similar for 24 hrs on contract basis for kadodara division.
Tender For corrigendum : this work is for construction of parapet, platform around sources etc and ground water recharge pit, supply and fixing gutter pipe and 75mm upvc pipes for collecting water from the roof top, down pipe for flushing out first flow water, scour pipe etc
Tender For sch. a: electrification work in connection with kherwadi - 1)provision of cover over platform i.e. (1) home hl pf & another island pf end to end at kherwadi railway station. (2) development of circulating area by providing vdc concrete surface etc. towards pf no 01 and 03 (2000 sqm) at kherwadi station. & (3) provision of boundary wall in connection with kumbh mela 2027. ; sch. b: electrification work in connection with kasbe-sukene - cop, all existing toilets to be improved. development of 8 new toilets block including divyangjan, circulating area by providing vdc.; sch. c: electrification work in connection with devlali- (1) provision of cover over platform including additional platform and old goods loops. (2) provision of approach road to be connected to extension old goods loop bsl end. (3) provision of boundary wall towards bsl end and csmt end at pf no. 01 and 02 approaches.
Tender For raising height of bts platform and ground level by moorum filling and other miscellaneous work at vivekanand nagar bts site gadchiroli recall
Tender For supply of materials and job work under the work of mc ew c of am special repair to conservation and restoration of entrance gateway of portion of old palace najibabad bijnor 2025 26 - items to be executed, u.s. lime, surkhi, coarse sand, lakhori brick, brick aggregate, sal wood, belgiri, gum, gur, demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge., demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 15.2.1 nominal concrete 1:3:6 or richer mix (including equivalent design mix), demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in charge. 15.7.4 in cement mortar, taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :15.13.1 of area 3 sq. metres and below, dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : 15.14.1 of sectional area 40 square centimetres and above, providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in charge. note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works. ( including errection & dismental after work), disposal of rubbish/malba heap,soil etc. from monument to outside of municipal limit by tractor trolly including excavation loading and unloading etc.requirement proper completion of work at monument /site, provision for providing & making lime slacking & mortar pit by means of pit excavation, brick masonry & plastering over it. the size of the over all pit is 8.00m x 3.00m & depth is 0.90m. the pit is divided in to three parts & cement plaster, painting (two or more coats on new work) with oil type wood preservative of approved brand and manufacture, painting(one or more coats) with black japan paint of approved brand and manufacture to give an even shade
Tender For supply of safety belt with pole strap for wr-ii,insulated rope 181 mtr or 600ft length each for wr-ii,light weight pulleys compatible to scaffolding for wr-ii,endless nylon slings for wr-ii,endless nylon slings compatible to scaffolding for wr-ii,tool buckets compatible to scaffoldin for wr-ii,micro-ammeter analog for wr-ii,hotline tools for live line maintenance for tl for sr-i,hotline tools for live line maintenance of 765 kv switchyard for sr-i,765 kv insulated aerial work platform or bucket truck for sr-i,hands on training for sr-i,annual maintenance contract for sr-i,insulated scaffolding system 15 meter for wr-ii,insulated scaffolding system 18 meter for wr-ii,conductive suit with static belt for wr-ii,conductive socks suitable for 765 or 400 kv switchyard for wr-ii,conductive boots suitable for 765 or 400 kv switchyard for wr-ii,conductive gloves suitable for 765 or 400 kv switchyard for wr-ii